The buttons and dials don’t respond
Check the HOLD switch. It locks the controls.
I can’t change the iris, shutter or white balance
FULL AUTO is on (the button is lit). Press it to turn it off.
“Media Needs to be Formatted”
The card was formatted somewhere else. Format it in the camera (MENU → Media → Format Media). This erases it.
I can’t find 25p
The camera is in the NTSC region. Go to MENU → System → Country → PAL Area.
The picture looks flat and grey
You’re in Cine EI. Turn on a monitor LUT (MENU → Video → Monitor LUT → 709(800%)), or switch Shooting Mode back to Custom.
I can’t change the gain
In Cine EI, gain is fixed and you adjust the Exposure Index instead.
“Media Near Full” or “Media Full”
“Near Full” means less than 5 minutes are left across both cards, so swap soon. “Full” means recording has stopped.
“Media Error… Needs to be Restored”
Follow the on-screen prompt to restore the card. If you see “Cannot Record to Media”, copy your footage off and use a different card.
There’s no sound
- Check the INPUT LEVEL dials aren’t turned right down, and the LEVEL CONTROL switches are set how you want.
- For XLR mics, check the INPUT switch, and use MIC+48V if the mic needs phantom power.
- S&Q doesn’t record sound.
The fan is noisy
Set MENU → System → Fan Control to Off in Rec.
“Battery Near End”
Swap the battery soon.
Still stuck?
As a last resort, use MENU → System → All Reset. Or call us on 0141 420 2053. We’re here Mon–Fri 8:30–5, and out-of-hours help is available through the same number.
Back to the FS7 quick start · FS7 full setup
Need one for your shoot?
Hire our Sony FS7 or Sony FS7 II from Progressive in Glasgow, with XQD cards, a card reader and batteries.
Call 0141 420 2053 or get in touch for a quote.



