The FS7 is a great first “proper” camera: shoulder-mounted, with XLR audio and built-in ND. If you’re new to it, start with step 1 and you’ll be shooting in minutes. More in FS7 full setup and FS7 troubleshooting.
1. Just want to shoot? Press FULL AUTO
The FULL AUTO button (it lights up) puts iris, gain, shutter and white balance on automatic. It’s perfect for run-and-gun, or while you learn the camera. Press it again to take manual control.
2. Power and cards
- Fit a BP-U battery and turn the POWER switch on.
- It records to XQD cards in slots A and B. Press SLOT SELECT to switch between them.
3. Menus
- MENU opens the menu. Turn the SEL/SET dial to move, and press it to select. CANCEL/BACK goes back.
- STATUS CHECK shows quick-look pages of all your settings.
4. Format the cards
MENU → Media → Format Media → Media(A) or Media(B) → Execute. This erases everything on the card.
5. Frame rate and format
- Your camera comes set to PAL (25p and 50p). If those frame rates are missing, go to MENU → System → Country → PAL Area.
- Codec: MENU → System → Codec → XAVC-I (best quality) or XAVC-L (smaller files).
- Video Format: MENU → System → Rec Format → Video Format, e.g. 3840×2160 25P.
6. Exposure (manual)
- Iris: the iris ring on the lens, or the IRIS dial.
- Shutter: use the SHUTTER button, at 1/50 for 25p.
- Gain/ISO: the ISO/GAIN switch has three positions (L, M and H).
- Zebras: MENU → VF → Zebra, to see when highlights are getting too bright.
7. ND filters
- FS7 II: set the PRESET/VARIABLE switch to VARIABLE and the ND/IRIS switch to ND. Then the ND dial gives you smooth, stepless ND. In PRESET, the ND FILTER dial clicks through Clear, 1, 2 and 3.
- FS7 (original): the ND FILTER dial clicks through Clear, 1/4, 1/16 and 1/64.
8. White balance
Use the WHT BAL switch:
- PRESET: a fixed colour temperature, 3200K by default. Change it in MENU → Paint → White → Preset White.
- A or B: point the camera at something white, then press the WHT BAL button to store your own white balance.
9. Sound
- Plug XLR mics into INPUT1 and INPUT2, and set each switch to LINE, MIC or MIC+48V.
- Set the CH1/CH2 LEVEL CONTROL switches to MAN, and adjust with the INPUT LEVEL dials.
10. Record
Press START/STOP on the grip or the body. The tally lights up red.
Need one for your shoot?
Hire our Sony FS7 or Sony FS7 II from Progressive in Glasgow, with XQD cards, a card reader and batteries.
Call 0141 420 2053 or get in touch for a quote.



