Shooting S-Log3 (Cine EI)
- MENU → System → Base Setting → Shooting Mode → Cine EI. The camera then records S-Log3 for grading.
- In Cine EI, you set an Exposure Index (EI) instead of gain.
- To see a normal-looking picture while you shoot, go to MENU → Video → Monitor LUT and choose 709(800%).
- Not grading? Stay in Custom mode for a ready-to-use picture.
Slow motion (S&Q)
MENU → Recording → S&Q Motion → Setting → On. Then set the Frame Rate, up to 150fps or more (depending on firmware) in HD. Sound isn’t recorded, and autofocus and auto iris are switched off.
Recording to both cards
MENU → Recording → Simul Rec → On. The same clip goes to A and B as a backup. This doesn’t work in S&Q.
Never miss the moment
Picture Cache Rec (MENU → Recording) keeps recording a few seconds before you press record.
Timecode
MENU → TC/UB → Timecode: set it, and choose Rec Run or Free Run.
Audio sources
MENU → Audio → Audio Input:
- Choose the source for CH1 and CH2: INPUT1, INPUT2 or the internal mic.
- INPUT1/2 MIC Reference sets the mic sensitivity.
ND presets (FS7 II)
Set what the 1, 2 and 3 presets do in MENU → Camera → ND Filter → Preset1–3.
Your buttons
- There are 10 ASSIGN buttons. Set them in MENU → System → Assignable Button.
- The STATUS CHECK button shows what’s assigned where.
Focus aids
- Peaking: MENU → VF → Peaking.
- Waveform or histogram: MENU → VF → Video Signal Monitor.
Fan noise
MENU → System → Fan Control: Auto, Minimum, or Off in Rec for quiet interviews.
Monitors
- SDI OUT 1 & 2 and HDMI OUT are on the rear.
- Set what each shows in MENU → Video → Output Format and Output Display.
Back to the FS7 quick start · Problems? See FS7 troubleshooting.
Need one for your shoot?
Hire our Sony FS7 or Sony FS7 II from Progressive in Glasgow, with XQD cards, a card reader and batteries.
Call 0141 420 2053 or get in touch for a quote.



