A one-page reference for crews who already know their way round an ARRI. Ours run SUP 6.1.0 with the Premium licence, so everything is unlocked: ARRIRAW, open gate and anamorphic, high speed, pre-recording, Textures and the Look Library. They have an LPL mount (with an LPL-to-PL adaptor) and go out with 4 × 1TB Codex Compact Drives, B-Mount batteries and 24 V block batteries as standard. For how long they last, see Recording times.
At a glance
- Sensor: Super 35, 4.6K (ALEV 4)
- EI: 160 to 6400, plus Enhanced Sensitivity (ES) at 2560 to 6400
- ND: built-in FSND 0.6, 1.2 and 1.8
- Shutter: 1° to 356°
- Codecs: Apple ProRes 422 HQ, 4444 and 4444 XQ, and ARRIRAW. (ARRICORE is on the Alexa 35 Xtreme only.)
- Colour: LogC4 / AWG4, with ALF4 look files
- Power: 20.5 to 33.6 V DC (24 V only). Draws 85 to 135 W while recording.
- Media: Codex Compact Drive (1TB or 2TB), up to 400 clips per drive
Sensor modes and max frame rates (1TB drive)
| Sensor mode | Recording resolutions | ARRIRAW max | ProRes max |
|---|---|---|---|
| 4.6K 3:2 Open Gate | 4608 x 3164 | 35 fps | 60 fps |
| 4.6K 16:9 | 4608 x 2592 (ARRIRAW), 4096 x 2304 (ProRes) | 45 fps | 75 fps |
| 4K 16:9 | 4K, UHD, 2K, HD | 55 fps | 90 to 120 fps |
| 3.8K 16:9 | UHD | 65 fps | 105 to 120 fps |
| 3.3K 6:5 (2x anamorphic) | 3328 x 2790, 4K 2.39:1 desqueezed | 55 fps | 75 to 90 fps |
| 3K 1:1 (2x anamorphic) | 3072 x 3072, 3.8K 2:1 desqueezed | 55 fps | 90 to 100 fps |
| 2.7K 8:9 (2x anamorphic) | UHD 16:9 desqueezed | – | 100 fps |
| 2K 16:9 S16 | 2048 x 1152 | – | 120 fps |
ProRes ranges depend on the flavour: 4444 XQ is the slowest. 2TB drives roughly double the ARRIRAW frame rates. The camera always shows its current limit on HOME → FPS.
Key menus
- Project rate: MENU → Recording → Project Settings → Project Rate. This also sets the sensor and SDI frame rates.
- Codec: MENU → Recording → Recording Codec. Switching may need a reboot.
- Sensor mode and resolution: MENU → Recording → Sensor Mode / Recording Resolution
- FPS, shutter, EI, ND, white balance: HOME → FPS / SHUTTER / EI / ND / WB
- Timecode: HOME → TC → Options → Run Mode and Mode
- Erase a drive: MENU → Media → Erase Media, or on the side display: Settings → Erase Media
- Look: MENU → Image → Look → Look. Set the monitoring with VF Processing and SDI 1/2 Processing in the same menu.
- Texture: MENU → Image → Texture → Texture
- Frame lines: MENU → Monitoring → Frame Lines → Frame Line
- Audio: MENU → Recording → Audio Recording
- User buttons: MENU → User Buttons → Camera User Buttons (1 to 9, plus VF 1 and VF 2 on the MVF-2)
- Power input priority: MENU → System → Power → Priority
- Fan: MENU → System → Fan Mode (Low Noise, or Rec Low above 30°C)
- Pre-recording: assign Prerecording to a user button. Set up to 20 seconds in MENU → Recording → Prerecording max. Duration.
- Licences: MENU → System → Licenses
- Factory reset: MENU → Setup → Factory Reset
Connectors
- PWR (8-pin LEMO) main power in, plus BAT on the rear interface for onboard batteries
- SDI 1 and SDI 2 / RET IN (BNC), up to 12G UHD
- SYNC IN (BNC), TC (5-pin LEMO)
- AUDIO (6-pin LEMO), 2-channel line level
- RS (3-pin Fischer, 24 V, 3 A), 12V (2-pin LEMO, 2 A)
- LBUS (4-pin LEMO, on the body and the lens mount), SERIAL (4-pin LEMO) for distance measuring
- ETH (10-pin LEMO), VF 1 and VF 2 for the MVF-2 or CCM-1, USB-C in the media bay
Gotchas
- It’s 24 V only. It won’t run from 14.4 V V-Lock or Gold Mount batteries. Use the B-Mounts or 24 V blocks we send.
- It’s LogC4, not LogC3. LUTs and ALF2 looks from the Mini LF or older Alexas won’t look right. Use LogC4 LUTs and ALF4 looks.
- Textures and Enhanced Sensitivity are baked in, even in ARRIRAW. Test anything other than K445 Default before the shoot.
- No mic inputs on the body. The AUDIO input is line level. Mics need the AEM-1 Audio Extension Module.
- Audio switches off when you’re off-speed. It only records when the sensor fps matches the project rate.
- Free Run timecode becomes Rec Run when you’re off-speed. It goes back to Free Run when you return to the project rate.
- The ND parks itself. When you power down, the ND moves to a safe position for transport. It goes back to your setting when you power up.
- Don’t label the drives. The metal side cools the drive. A drive is full at 400 clips, whatever space is left.
Need help? Call us on 0141 420 2053. We’re here Mon–Fri 8:30–5, and out-of-hours help is available through the same number.
Need one for your shoot?
Hire our ARRI Alexa 35 from Progressive in Glasgow, fully licensed, with Codex drives, MVF-2 viewfinder and batteries.
Call 0141 420 2053 or get in touch for a quote.



