The FX9 is a full-frame broadcast-style camcorder with a built-in variable ND. Here’s how to get rolling. More in FX9 full setup and FX9 troubleshooting.
1. Power and cards
- Fit a BP-U battery and turn the POWER switch on.
- It records to XQD cards in slots A and B. There’s also a small SD “utility” slot for proxies and settings.
- If you see “Please Execute APR” when you switch on, it’s not a fault. Run it from the menu. It tidies up bright pixels on the sensor and takes about 30 seconds.
2. Menus
- STATUS shows quick-look status pages: Camera, Audio, Project and so on.
- MENU opens the full menu.
3. Format the cards
MENU → TC/Media → Format Media → Media(A) or Media(B) → Execute. This erases everything on the card.
4. Frame rate and format
The FX9 has no PAL/NTSC setting. You just pick the frame rate:
- Frame rate: MENU → Project → Rec Format → Frequency → 25. The camera may restart.
- Imager Scan Mode: FF 6K for full frame at up to 30fps, or S35 4K for Super 35 lenses, or up to 60fps.
- Codec: XAVC-I (best quality), XAVC-L (smaller files) or MPEG HD.
- Video Format: e.g. 3840×2160.
5. Shooting mode
MENU → Project → Base Setting → Shooting Mode:
- SDR: a ready-to-use Rec.709 picture.
- HDR: HLG.
- Cine EI: S-Log3 for grading.
6. Shooting S-Log3 (Cine EI)
- Base ISO: 800 for normal light, 4000 for low light. Set it in MENU → Shooting → ISO/Gain/EI → Base ISO.
- Monitor LUT: MENU → Shooting → Monitor LUT → LUT Select → s709. This makes the picture look normal on screen while the recording stays S-Log3.
7. ND
- Set the ND PRESET/VARIABLE switch to VARIABLE, press the ND FILTER POSITION [+] button to switch the ND in, then turn the ND VARIABLE dial.
- Press and hold ND VARIABLE AUTO for 2 seconds for automatic ND. It lights up when it’s on.
8. Shutter and white balance
- Shutter: use the SHUTTER button and the multi-function dial, at 1/50 or 180° at 25p.
- White balance: use the WHT BAL switch:
- Preset: set the colour temperature in MENU → Shooting → White → Preset White.
- A or B: store your own white balance by pressing WB SET on something white, or type in a colour temperature (Shooting → White → Color Temp <A>/<B>).
9. Sound
- Plug XLR mics into INPUT1 and INPUT2, and set each switch to LINE, MIC or MIC+48V.
- Use the CH1/CH2 INPUT switches to pick the source and AUTO/MAN for level control, then set levels with the AUDIO LEVEL dials.
10. Timecode and record
- Timecode: MENU → TC/Media → Timecode.
- Record: press START/STOP on the grip or the handle.
Need one for your shoot?
Hire our Sony FX9 from Progressive in Glasgow, with XQD cards, a card reader and batteries.
Call 0141 420 2053 or get in touch for a quote.



