The FX6 works more like a broadcast camcorder than the FX3, with dedicated buttons and a two-level menu. Here’s how to get rolling. More in FX6 full setup and FX6 troubleshooting.
1. Power and cards
- Fit a BP-U battery and turn the POWER switch on.
- There are two slots, A and B, which take CFexpress Type A or SD cards.
2. Finding your way round the menus
- Press MENU for the status screens. These are quick-look pages for Camera, Audio, Media, Project and so on, and you can tap most items to change them.
- Press and hold MENU for the full menu.
- The Home screen (v6) shows the six key settings, FPS, ISO/EI, shutter, ND, look and white balance, in big tiles. Tap any of them to change it.
3. Format the cards
Go to full menu → TC/Media → Format Media → Media(A) or Media(B) → Quick Format. You can also do it from the Media status screen. This erases everything on the card.
4. Frame rate and format
- Your camera comes set to 25p. If it isn’t, go to full menu → Project → Rec Format → Frequency → 25. The camera may restart.
- Codec: Project → Rec Format → Codec → XAVC-I (best for editing) or XAVC-L (smaller files).
- Video Format: Project → Rec Format → Video Format, e.g. 3840×2160.
- Imager Scan Mode: FF (full frame) or S35. S35 records HD only.
5. Shooting mode
Full menu → Project → Base Setting → Shooting Mode:
- Custom: a ready-to-use picture, Rec.709 or HLG.
- Cine EI: S-Log3 for grading, shot like a film camera.
- Flexible ISO: S-Log3, but you can change ISO normally.
6. Shooting S-Log3 (Cine EI)
- Base ISO: 800 for normal light, 12800 for low light. Set it in Shooting → ISO/Gain/EI → Base ISO, or on the Camera status screen.
- LUT: on the Monitoring status screen, choose Base Look/LUT (e.g. s709). This makes the picture look normal on screen, while the recording stays S-Log3.
7. ND, the FX6’s party trick
- Set the ND PRESET/VARIABLE switch to VARIABLE, press the ND FILTER POSITION [+] button to switch the ND in, and turn the ND VARIABLE dial for smooth exposure control.
- Press and hold ND VARIABLE AUTO for automatic ND.
8. Shutter and white balance
- Shutter: press and hold SHUTTER to choose Speed or Angle, then use 1/50 or 180° at 25p.
- White balance: press and hold WHT BAL for the presets (3200K, 4300K, 5600K and so on).
9. Sound
- Plug XLR mics into INPUT1 and INPUT2 on the handle. Set each one’s switch to LINE, MIC or MIC+48V.
- Set the CH1/CH2 AUTO/MAN switches to MAN, and set levels with the AUDIO LEVEL dials.
10. Timecode and record
- Timecode: full menu → TC/Media → Timecode. Set Mode to Preset, Regen or Clock, and Run to Rec Run or Free Run.
- Record: press START/STOP on the grip or on the handle. The tally lights red.
Need one for your shoot?
Hire our Sony FX6 from Progressive in Glasgow, with CFexpress cards, a card reader and batteries.
Call 0141 420 2053 or get in touch for a quote.



