The A7S II’s menus are older and quite different from the FX3 and A7S III, so here’s what you need. More in A7S II full setup and A7S II troubleshooting.
1. Power and card
- The battery is an NP-FW50. Carry plenty of spares, as each lasts about an hour of filming.
- There’s one SD card slot. For 4K you need an SDXC card of 64GB or more, and recording at 100Mbps needs a U3 card.
- Format the card before you shoot: MENU → Setup → Format. This erases everything on the card.
2. Movie mode
Turn the mode dial (press the lock button in its centre) to Movie/HFR. Press the MOVIE button to start and stop recording.
3. Frame rate
Your camera comes set to PAL / 25p. If 25p is missing, change it back in MENU → Setup → NTSC/PAL Selector. You’ll need to reformat the card after switching.
4. Format and quality
- MENU → Camera Settings → File Format → XAVC S 4K, or XAVC S HD for long jobs.
- MENU → Camera Settings → Record Setting → 25p 100M for the best quality.
5. Exposure
- Use 1/50 shutter at 25p.
- Zebras: MENU → Custom Settings → Zebra.
- ISO: MENU → Camera Settings → ISO.
6. Shooting S-Log
- MENU → Camera Settings → Picture Profile. Choose PP8 (S-Log3 / S-Gamut3.Cine) or PP7 (S-Log2). Choose Off for a normal, ready-to-use picture.
- S-Log looks flat on screen. To see normal contrast while recording, use MENU → Setup → Gamma Disp. Assist.
7. Timecode
MENU → Setup → TC/UB Settings → TC Preset to set it, and TC Run for Rec Run or Free Run.
8. Sound
MENU → Camera Settings → Audio Rec Level, and monitor on headphones. The A7S II has a 3.5mm mic input, but no XLR inputs.
9. Start from a clean slate
MENU → Setup → Setting Reset → Camera Settings Reset. Your recordings are kept.
Need one for your shoot?
Hire our Sony A7S II from Progressive in Glasgow, with an SD card and batteries.
Call 0141 420 2053 or get in touch for a quote.



