What each card can record
- PROSSD 1TB: everything, and it’s the only one that does ProRes RAW.
- CFexpress Type B: ProRes 422 HQ up to 6K at 30fps, and C4K up to 120fps.
- USB-C SSD: C4K up to 60fps.
Slow motion
- Tap FPS, turn on S&Q, then set the project frame rate (25) and the sensor frame rate separately.
- No audio is recorded when the two are different, and timecode switches to Rec Run.
Timecode
Tap and hold the TC display:
- Run Mode: Free Run or REC Run.
- Mode: Regen, Preset (then use TC Settings to set the start), or Jam Synced.
- To jam sync: plug your timecode box into the TC (BNC) port on the Expansion Plate, then set Mode to Jam Synced. Free Run is needed. If the plate’s not fitted, the 3.5mm port can also take timecode (HOME → Recording → Audio → 3.5mm Mic Function → Sync TC).
Sound
- XLR (Expansion Plate): two XLR inputs, each with a mic/line switch and +48V phantom power for pro mics.
- HOME → Recording → Audio: choose the sources for CH1 and CH2 (XLR, the built-in mics, 3.5 Mic or 3.5 Line), and set gain from −50 to +24dB.
- Tap the audio meters on screen for quick gain and headphone volume. Keep levels out of the yellow and red.
SDI output
The Expansion Plate has an SDI output for an external monitor or a video transmitter.
White balance
Tap WB to choose a preset. Press and hold for custom Kelvin and tint, or point the camera at something white or grey and use Measure WB.
Exposure tools
- The exposure assist button on the left grip turns them on and off.
- Choose Zebra, Waveform or False Color in HOME → Display → Exposure Assistant.
Focus tools
- The PEAK button shows focus peaking. You can switch it to LiDAR Waveform or Focus Magnify.
- HOME → Lens → Focus → AF Mode:
- AF: automatic focus.
- AMF: the camera focuses, but you can take over with the dial at any time.
- ROI Mode:
- Spot: tap the screen where you want focus.
- Wide: focuses on the nearest subject in the centre box.
- Smart: finds people. Confirm with the ActiveTrack button to follow them.
Manual (non-DJI) lenses
Fit the X9 Focus Motor, then go to HOME → Lens → Calibration → Manual Calibration. Name the lens, set infinity, then the closest focus. Calibrate at least 2 points, or 5 for best results.
Gimbal and Z-axis settings
- HOME → Stabilizer → Gimbal Settings:
- Gimbal mode: Lock, Pan Follow, Pan & Tilt Follow, FPV or Custom.
- Follow speed: how quickly the gimbal follows you.
- Z-axis mode: Follow, Lock or Car Mount.
- Sport mode for fast action: hold the M button on the left grip.
- Balance the Z-axis with its adjustment knob, following the on-screen guide. Keep the Ronin level while you do it.
- Push the gimbal by hand: HOME → Stabilizer → Gimbal Calibration → Push Pan/Tilt.
Your own LUTs
- Copy a 33-point .cube file to the root of a formatted drive. Use letters and numbers only in the name, with no spaces.
- Then go to HOME → Display → LOOK → LUT File Settings → Import.
Save your setup
HOME → User Settings → User Profile saves camera settings, gimbal settings and lens calibrations to the drive, so you can export them and import them again later.
Fan noise
HOME → System → Fan Mode:
- Low Noise: quieter.
- Rec Low: off while recording, but only with the Z-axis turned off.
Remote monitor (Transmission Expansion Plate and Hi-Bright Monitor)
- On the remote monitor, go to System Settings → Connection Settings and choose Control Monitor A or B.
- Then, on the Ronin, go to HOME → Transmission → Link Device. Both show Connected when they’re linked.
- Control mode (the default) lets the remote monitor change the camera’s settings. Broadcast mode lets any number of monitors watch.
Long takes
Clips longer than 3 hours are automatically split into a new file. Nothing is lost.
Back to the DJI Ronin 4D quick start · Problems? See DJI Ronin 4D troubleshooting.
Need one for your shoot?
Hire our DJI Ronin 4D from Progressive in Glasgow, fully kitted, with the RAW licence, PROSSDs, monitors and batteries.
Call 0141 420 2053 or get in touch for a quote.



