A one-page reference for crews who already know their way round an ARRI. Ours run SUP 7.3.2. They have an LPL mount (with an LPL-to-PL adaptor) and go out with 4 × 1TB Codex Compact Drives, V-Lock batteries and 24 V block batteries as standard. For how long they last, see Recording times.
At a glance
- Sensor: Large format, 4.5K (ALEV 3 A2X)
- EI: 160 to 3200
- ND: built-in FSND 0.6, 1.2 and 1.8
- Codecs: MXF/Apple ProRes 422 HQ, 4444 and 4444 XQ, MXF/ARRIRAW
- Colour: LogC3, with ALF2 look files
- Power: 11 to 34 V DC, so it runs on 12 V or 24 V. Draws 69 to 89 W while recording.
- Media: Codex Compact Drive
Recording resolutions and frame rates
| Recording resolution | ARRIRAW | ProRes |
|---|---|---|
| 4.5K LF 3:2 Open Gate | up to 40 fps | up to 40 fps |
| 4.5K LF 2.39:1 | up to 60 fps | up to 60 fps |
| 4.3K LF 16:9 – UHD | – | up to 40 fps |
| 4.3K LF 16:9 – HD | – | up to 75 fps |
| 3.8K LF 16:9 – UHD | up to 60 fps | up to 60 fps |
| 3.8K LF 16:9 – 2K or HD | – | up to 90 fps |
| 2.8K LF 1:1 | up to 60 fps | up to 60 fps |
| 3.4K S35 3:2 | up to 60 fps | – |
| 3.2K S35 16:9 | – | up to 75 fps |
| 2.8K S35 4:3 | – | up to 75 fps |
| 2.8K S35 16:9 – HD | – | up to 100 fps |
The heavier ProRes flavours can lower the maximum. The camera always shows its current limit on HOME → FPS.
Key menus
- Project rate: MENU → Recording → Project Settings → Project Rate. This also sets the sensor and SDI frame rates.
- Codec: MENU → Recording → Recording Codec. Changing between ProRes and ARRIRAW reloads the software.
- Resolution: MENU → Recording → Recording Resolution
- FPS, shutter, EI, white balance: HOME → FPS / SHUTTER / EI / WB
- ND: HOME → EI → ND
- Timecode: HOME → TC → Options → Run Mode
- Erase a drive: MENU → Media → Erase Media
- Look: MENU → Look → Look. Set the monitoring with EVF/Mon. Processing and SDI 1/2 Processing in the same menu.
- Frame lines: MENU → Monitoring → Frame Lines → Frame Line
- Zebras and false colour: MENU → Monitoring → Exposure Tools
- Audio: MENU → Recording → Audio Recording
- User buttons: MENU → User Buttons → Camera User Buttons
- Fan: MENU → System → Fan Mode (Low Noise, or Rec Low above 30°C)
- Factory reset: MENU → Setup → Factory Reset
Connectors
- BAT (8-pin LEMO) main power in, for 24 V blocks. Ours also have an onboard V-Lock plate.
- SDI 1 and SDI 2 (BNC). HD on both, UHD on SDI 2 only.
- SYNC IN (BNC), TC (5-pin LEMO)
- AUDIO (6-pin LEMO), 2-channel line level
- RS (3-pin Fischer, 24 V, 3 A), 12V (2-pin LEMO)
- EXT (7-pin LEMO), ETH (10-pin LEMO), LBUS on the lens mount
Gotchas
- Watch the current draw. ARRI’s battery plates are rated to 10 A, about 144 W at 14.4 V including accessories. For heavy builds, use the 24 V blocks.
- No mic inputs. The AUDIO input is line level. The internal mics record a scratch track to channels 3 and 4.
- Audio switches off when you’re off-speed. It only records when the sensor fps matches the project rate.
- It’s LogC3 with ALF2 looks. Don’t load Alexa 35 (LogC4/ALF4) looks or LUTs.
- UHD monitoring is from SDI 2 only.
- Changing resolution or codec may reload the software. Allow a moment before you roll.
Need help? Call us on 0141 420 2053. We’re here Mon–Fri 8:30–5, and out-of-hours help is available through the same number.
Need one for your shoot?
Hire our ARRI Alexa Mini LF from Progressive in Glasgow, with Codex drives, MVF-2 viewfinder and batteries.
Call 0141 420 2053 or get in touch for a quote.



