Choosing a scan mode
Set this first, as it decides which frame rates and formats you can use. MENU → Project → Rec Format → Imager Scan Mode:
- FF 6K: best quality, up to 30fps.
- FFcrop 5K: full-frame look with a slight crop.
- S35 4K: Super 35, up to 60fps.
- FF 2K / S35 2K: for 100–180fps slow motion, at HD only and lower quality.
Slow motion (S&Q)
Press the S&Q assignable button, or go to MENU → Shooting → S&Q Motion. Choose your scan mode for the frame rate you want first, as above.
Recording to both cards
Simul Rec records to A and B at the same time, as a backup. When one card is nearly full, the camera can carry on recording on the other. You’ll see “Will Switch Slots Soon”.
Proxies
Proxies record to an SD card in the utility slot. Turn them on in MENU → Project → Proxy Rec.
Monitor LUTs in detail
- The monitor LUT applies to the viewfinder, SDI and HDMI together.
- Monitor LUT Setting → Internal Rec records the LUT into your footage. Leave it Off if you’re grading.
- If you can’t use a LUT on a particular output, use Gamma Display Assist for the viewfinder instead.
Exposure Index
In Cine EI, the EI value shown on screen changes how the LUT looks and helps you balance the shadows and highlights, without changing what’s recorded.
SDR and HDR modes
In SDR and HDR, use Base Sensitivity (High or Low) in MENU → Shooting → ISO/Gain/EI, and adjust gain or ISO as normal.
ND presets
Set the ND switch to PRESET, and use the ND FILTER POSITION buttons to step through the preset strengths.
Your buttons
- There are 10 assignable buttons, set in MENU → Project → Assignable Button. Handy ones to assign are Base ISO/Sensitivity, Video Signal Monitor and Gamma Display Assist.
- Multi-function dial: set what it does by default in MENU → Project → Multi Function Dial.
Timecode sync
Use the TC IN/TC OUT connector, and set it with the IN/OUT switch.
External recorders
To trigger a recorder over HDMI, turn on record control in the Project menu and HDMI timecode output in the TC/Media menu. Turn off text overlays in Monitoring → Output Display → HDMI for a clean picture.
Back to the FX9 quick start · Problems? See FX9 troubleshooting.
Need one for your shoot?
Hire our Sony FX9 from Progressive in Glasgow, with XQD cards, a card reader and batteries.
Call 0141 420 2053 or get in touch for a quote.



