A one-page reference for crews who already know their way round an ARRI. Ours is an Alexa Plus 16:9 with the SxS module, on SUP 11.1.1 with the High Speed and DNxHD licences. It has a PL mount and goes out with 7 × 64GB SxS cards, V-Lock batteries and 24 V block batteries as standard. For how long they last, see Recording times.
At a glance
- Sensor: Super 35, 16:9 (ALEV III), base 800 ASA
- EI: 160 to 3200
- ND: none built in. Bring filters.
- Codecs: ProRes 422, 422 HQ and 4444, and DNxHD 145, 220x and 444 (HD only)
- Resolutions: HD (1920 x 1080) and 2K (2048 x 1152). 3.2K, 4444 XQ and ARRIRAW need the XR module, which the SxS version doesn’t have.
- Frame rates: 0.75 to 60 fps, or 60 to 120 fps in High Speed mode (HD only)
- Plus extras: lens data (LDS) on the PL mount, built-in ARRI wireless lens control, and an extra 24 V power output
- Gamma: Log C (LogC3) or Rec 709, with ALF1 looks
- Power: 10.5 to 34 V DC, about 85 W
- Media: SxS PRO or SxS PRO+, plus an SD card (4GB max) for looks, setups and frame grabs
Max frame rates on 64GB SxS
| Codec | HD | 2K |
|---|---|---|
| ProRes 422 / 422 HQ | 60 fps (120 with High Speed) | 60 fps |
| ProRes 4444 | 60 fps | 60 fps |
| DNxHD 145 / 220x | 60 fps (120 with High Speed) | – |
| DNxHD 444 | 55 fps | – |
Controls and key menus
- HOME screen: FPS, AUDIO, SHUTTER, EI, COLOR and WB, with TC, INFO, USER and PLAY alongside. Use the jogwheel to move and select, BACK to step back, and HOME to return.
- Codec and resolution: MENU → Recording → Internal → Format / Setting / Resolution. Switching recording on or changing format takes about 20 seconds.
- Project frame rate: MENU → Project → Project frame rate
- Format an SxS card: MENU → Recording → Internal → Quick format SxS card, then press both FORMAT buttons.
- Gamma: COLOR → GAMMA sets Log C or Rec 709 separately for internal recording, REC OUT, MON OUT and EVF.
- Look: COLOR → SET LOOK, then tick the outputs to apply it to.
- REC OUT: MENU → Recording → REC OUT
- MON OUT: MENU → Monitoring → MON OUT
- SD card: MENU → System → SD Card → Format + prepare SD card
Connectors
- BAT (2-pin Fischer) for 24 V blocks or mains. Ours also has an onboard V-Lock plate.
- REC OUT 1 and 2 (BNC HD-SDI, 1.5G or 3G), MON OUT (BNC HD-SDI), RET/SYNC IN (BNC)
- AUDIO IN (5-pin XLR, 2-channel line level), AUDIO OUT (3.5mm headphones)
- TC (5-pin LEMO), RS (3-pin Fischer, 24 V), 12V (2-pin LEMO)
- EXT, ETHERNET (10-pin LEMO), EVF
Gotchas
- Check the internal gamma. If it’s on Rec 709, that’s baked into the recording. Set Log C if you’re grading.
- Looks only apply to outputs set to Rec 709.
- There’s no internal ND.
- Use big batteries. ARRI says 90 Wh or more, and at least 6 A for 12–15 V batteries.
- High Speed is HD only and internal only. On SxS it works with ProRes 422, 422 HQ, DNxHD 145 and 220x, not 4444. Going into or out of High Speed mode resets the frame rate.
- DNxHD doesn’t work with Prerecord on.
- External recording: keep the REC OUT frame rate at or above the sensor frame rate, or you’ll drop frames.
- The SD card must be 4GB or smaller, formatted FAT or FAT32.
- Pulling an SxS card mid-take loses only the last second of that clip.
Need help? Call us on 0141 420 2053. We’re here Mon–Fri 8:30–5, and out-of-hours help is available through the same number.
Need one for your shoot?
Hire our ARRI Alexa Plus from Progressive in Glasgow, with SxS cards, EVF-1 viewfinder and batteries.
Call 0141 420 2053 or get in touch for a quote.



