Everything you need to get rolling in five minutes. For more detail, see FX3 full setup and FX3 troubleshooting.
1. Power and cards
- The battery is an NP-FZ100. Slide the battery cover switch to open it.
- Both card slots take CFexpress Type A or SD cards. The camera records to Slot 1 by default.
- Format the cards in the camera before you shoot: MENU → Shooting → Media → Format → choose the slot → Enter. This erases everything on the card.
2. Switch to movie mode
Press the MODE button, choose Movie, and press the centre of the control wheel.
3. Frame rate
Your camera will usually come set to PAL / 25p. If 25p or 50p ever disappear from the frame-rate list, someone has switched it to NTSC. Change it back in MENU → Setup → Area/Date → NTSC/PAL Selector.
4. Choose your format
- MENU → Shooting → Image Quality/Rec → File Format. For most jobs choose XAVC S-I 4K (Intra: best for editing). For long events choose XAVC HS 4K or XAVC S 4K, which give you much longer on a card.
- MENU → Shooting → Image Quality/Rec → Movie Settings → set Rec Frame Rate (e.g. 25p) and Record Setting (e.g. 4:2:2 10-bit).
5. Exposure
- Shutter: 1/50 at 25p. If you prefer degrees, set MENU → Exposure/Color → Exposure → Shutter Mode → Angle, then use 180°.
- ISO: use the ISO button.
- Zebras: MENU → Exposure/Color → Zebra Display.
6. Shooting S-Log3 with a LUT
- MENU → Shooting → Image Quality/Rec → Log Shooting Setting → Log Shooting → Cine EI.
- MENU → Exposure/Color → Exposure → Base ISO: 800 for normal light, 12800 for low light.
- MENU → Exposure/Color → Color/Tone → Select LUT → s709 or 709(800%).
- MENU → Setup → Display Option → Display LUT → On. The picture on the screen then looks normal, but the recording is still S-Log3.
7. Timecode
MENU → Shooting → TC/UB → Time Code Preset to set it, and Time Code Run for Rec Run or Free Run.
8. Sound
- Fit the XLR handle for pro mics. Each input has a LINE / MIC / MIC+48V switch.
- Set levels in MENU → Shooting → Audio Recording → Audio Rec Level, and monitor on headphones.
9. Record
Press the REC button on top of the camera or on the handle. A red frame shows while you’re recording.
10. Start from a clean slate
If the camera’s acting oddly after someone else’s shoot, go to MENU → Setup → Reset/Save Settings → Setting Reset→ Camera Settings Reset. Your recordings are kept.
Need one for your shoot?
Hire our Sony FX3 from Progressive in Glasgow, with CFexpress cards, a card reader, batteries and the XLR handle.
Call 0141 420 2053 or get in touch for a quote.



