The original C300 records Full HD to Compact Flash cards. It’s simple and reliable, with built-in ND and XLR audio. If you’re new to it, start with step 1 and you’ll be shooting in minutes. More in C300 Mark I full setup and C300 Mark I troubleshooting.
1. Power and cards
- Fit a BP-955 or BP-975 battery and set the power switch to CAMERA. (MEDIA is for playback.)
- It records to Compact Flash (CF) cards in slots A and B. Press SLOT SELECT to switch between them. These aren’t the same as the Mark II’s CFast cards.
2. Menus
- MENU opens and closes the menu. Push the joystick or turn the SELECT dial to move, and press the joystick (SET) to select. CANCEL goes back.
- STATUS shows quick-look pages of all your settings.
3. Format the cards
MENU → Other Functions → Initialize Media → CF A or CF B → OK. This erases everything on the card.
4. Frame rate and format
- Your camera comes set to PAL. If 25p is missing, go to MENU → Other Functions → NTSC/PAL → PAL.
- Frame Rate: MENU → Other Functions → Frame Rate → 25.00P. (The default, 50.00i, is interlaced.)
- Quality: MENU → Other Functions → Bit Rate/Resolution → 50 Mbps 1920×1080, the best it does.
5. Exposure (manual)
- Iris: the iris ring on the lens.
- Shutter and ISO: press FUNC. until shutter or ISO is highlighted, turn the SELECT dial, then press SET. Use 1/50 for 25p.
- Zebras: MENU → LCD/VF Setup → Zebra → On, to see when highlights are getting too bright.
6. ND filters
Press the ND + or – buttons to step through ND 1 (2 stops), ND 2 (4 stops), ND 3 (6 stops) and off.
7. White balance
Press FUNC. until the white balance icon is highlighted, then choose with the SELECT dial:
- Daylight or Tungsten presets, or a set colour temperature.
- A or B: point the camera at something white that fills the screen, then press the Å button. Wait until the icon stops flashing.
8. Sound
- Plug XLR mics into CH1 and CH2 on the monitor unit, and set each switch to LINE, MIC or MIC+48V.
- Set the CH1/CH2 audio level switches to M, and adjust with the dials. 5 on the dial is 0 dB.
- Leave the small MIC socket on the camera empty. A mic plugged in there takes over from the XLRs.
9. Record
Press START/STOP. The tally lights up red.
Need one for your shoot?
Hire our Canon C300 from Progressive in Glasgow, with CF cards and batteries.
Call 0141 420 2053 or get in touch for a quote.



